Shackles

• Working Load Limit permanently shown on every shackle.
• Forged—Quenched and Tempered, with alloy pins.
• Capacities 1/3 thru 55 metric tons.
• Look for the Red Pin . . . the mark of genuine Crosby quality.
• Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
• Hot Dip galvanized or Self Colored.
• Fatigue rated.

Shackles

• Capacities 2 thru 21 metric tons.
• Forged Alloy Steel - Quenched and Tempered, with alloy pins..
• Working Load Limit permanently shown on every shackle.
• Hot Dip Galvanized.
• Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
• Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.

Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade B, Class 2, except for those provisions required of the contractor.

G-209A
Crosby® Alloy Screw Pin Shackles

Nominal Size (in.)	Working Load Limit (t)*	G-209-A Stock No.	Weight Each (lbs.)	Dimensions (in.)											Tolerance +/-
				A	B	C	D	E	F	G	H	L	M	P	C	A
3/8	2	1017450	.31	.66	.44	1.44	.38	1.03	.91	1.78	2.49	.25	2.03	.38	.13	.06
7/16	2-2/3	1017472	.38	.75	.50	1.69	.44	1.16	1.06	2.03	2.91	.31	2.38	.44	.13	.06
1/2	3-1/3	1017494	.63	.81	.63	1.88	.50	1.31	1.19	2.31	3.28	.38	2.69	.50	.13	.06
5/8	5	1017516	1.38	1.06	.75	2.38	.63	1.69	1.50	2.94	4.19	.44	3.34	.69	.13	.06
3/4	7	1017538	2.25	1.25	.88	2.81	.75	2.00	1.81	3.50	4.97	.50	3.97	.81	.25	.06
7/8	9-1/2	1017560	3.61	1.44	1.00	3.31	.88	2.28	2.09	4.03	5.83	.50	4.50	.97	.25	.06
1	12-1/2	1017582	5.32	1.69	1.13	3.75	1.00	2.69	2.38	4.69	6.56	.56	5.07	1.06	.25	.06
1-1/8	15	1017604	7.25	1.81	1.25	4.25	1.16	2.91	2.69	5.16	7.47	.63	5.59	1.25	.25	.06
1-1/4	18	1017626	9.88	2.03	1.38	4.69	1.29	3.25	3.00	5.75	8.25	.69	6.16	1.38	.25	.06
1-3/8	21	1017648	13.25	2.25	1.50	5.25	1.42	3.63	3.31	6.38	9.16	.75	6.84	1.50	.25	.13

* NOTE: Maximum Proof Load is 2 times the Working Load Limit (metric tons) and 2.2 times the Working Load Limit (short tons). Minimum Ultimate Strength is 4.5 times the Working Load Limit for metric tonnes, and 5 times the Working Load Limit for short tons. For Working

Forged Shackles

Wide Body Shackles

• All sizes Quenched and Tempered for maximum strength.
• Forged alloy steel from 30 through 300 metric tons.
• Cast alloy steel from 400 through 1000 metric tons.
• Sizes 300 tons and smaller are proof tested to 2 times the Working Load Limit.
• Sizes 400 tons and larger are tested to 1.33 times Working Load Limit.
• All ratings are in metric tons, embossed on side of bow.
• Bows and pins are furnished Dimetcoted. All Pins are Dimetcoted then painted red.
• Greatly improves wearability of wire rope slings.
• Can be used to connect HIGH STRENGTH Synthetic Web Slings, HIGH STRENGTH Synthetic Round Slings or Wire Rope Slings.
• Increase in shackle bow radius provides minimum 58% gain in sling bearing surface and eliminates need for a thimble.
• Increases usable sling strength minimum of 15%.
• Pin is non-rotating, with weld on handles for easier use (300t and larger).
• All 2160 shackles are individually proof tested and magnetic particle inspected. Crosby certification available at time of order.
• Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
• Shackles requiring ABS, DNV, Lloyds and other certifications are available upon special request and must be specified at time of order.
• Shackles are produced in accordance with certified lifting appliance requirements.

• Non Destructive Testing
• Serialization/Identification
• Material Testing (Physical/Chemical/Charpy)
• Proof Testing

Working Load Limit (t)*	G-2160 Stock No.	Weight Each (lbs.)	Dimensions (in.)
			A	B +/- .25	C	D +/- .02	E	G	H	J	K	P	R
† 30	1021575	25	7.69	2.37	1.38	1.63	3.50	1.75	6.94	3.13	2.50	8.5	11.38
† 40	1021584	35	9.28	2.88	1.69	2.01	4.00	2.31	8.06	3.75	3.00	10.62	13.62
† 55	1021593	71	10.36	3.25	2.00	2.28	4.63	2.63	9.36	4.50	3.50	12.26	15.63
† 75	1021290	99	14.37	4.13	2.12	2.75	5.00	2.50	11.53	4.75	3.64	12.28	18.41
† 125	1021307	161	16.51	5.12	2.56	3.15	5.71	3.15	14.36	5.91	4.33	15.96	22.65
† 200	1021316	500	20.67	5.91	3.35	4.12	7.28	4.33	18.90	8.07	5.41	19.49	29.82
† 300	1021325	811	24.20	7.38	4.00	5.25	9.25	5.38	23.63	10.38	6.31	23.38	37.26
†† 400	1021334	1041	30.06	8.66	5.16	6.30	11.81	6.30	22.64	12.60	7.28	27.17	38.78
†† 500	1021343	1378	32.99	9.84	5.73	7.09	13.39	6.69	24.81	13.39	8.86	31.10	42.72
†† 600	1021352	1833	35.39	10.83	6.04	7.87	13.78	7.28	27.56	14.57	9.74	34.06	47.24
†† 700	1021361	2446	38.91	11.81	6.59	8.46	14.80	7.87	28.94	15.75	10.63	37.01	50.18
†† 800	1021254	3016	43.50	12.80	7.30	9.06	16.54	8.27	29.53	16.54	10.92	38.39	52.09
†† 900	1021389	3435	43.60	13.78	7.78	9.84	16.93	8.66	29.82	17.32	11.52	40.35	54.04
†† 1000	1021370	4022	45.98	14.96	8.33	10.63	17.72	9.06	29.92	18.11	12.11	43.32	55.31
†† 1250	1021272	5706	49.86	16.93	9.15	11.81	21.00	10.43	36.61	20.87	12.70	46.26	65.35

* Ultimate Load is 5 times the Working Load Limit
† Forged Alloy Steel. Proof Load is 2 times the Working Load Limit.
†† Cast Alloy Steel. Proof Load is 1.33 times the Working Load Limit.